Rotating Bench Vise
Sturdy high-quality vises especially suited for tool and die makers and for electronic and
general metalworking. The vise head can be rotated a full 360° and tilted from a flat 180°
horizontal to a full 90° vertical, then locked securely in place, allowing your workpiece to
be easily swiveled and angled into the best working position. Supplied with steel jaws.
Optional nylon jaws are available. One side of the steel jaws has two V-shaped grooves for
holding wire and round or tube stock. Movable vise jaw slides in a brass guide. Jaw clamp-
ing screw and joint locking screw work on bronze lead nuts.
Choose from two models: one has 1
13
/
16
" jaws and 3" clamping range, and other has 3
1
/
4
"
jaws and 4
1
/
8
" clamping range. Each includes base mount with clamp screw for secure
mounting on the edge of a workbench or counter up to 3" thick. Base mount can also be
removed for fixing the vise with screws directly to benchtop.
Bench Vise
Clamping
Clamping
Jaw Width
Range
Height
Net Wt.
Item#
Each
B. 1
13
/
16
" (46mm)
3" (75mm)
1
3
/
8
" (35mm)
4 lbs.
820-4056
$202.75
3
1
/
4
" (82mm)
4
1
/
8
" (105mm)
2
7
/
32
" (56mm)
14 lbs.
820-4058
399.00
Optional Nylon Jaws for #820-4056
820-4060
48.65
Optional Nylon Jaws for #820-4058
820-4062
51.40
B
Mini Bench Vise
Great for small items. Features sturdy cast iron body with anvil top and enamel finish. Fits
benchtops up to 1
1
/
8
" thick. Jaws are 1" wide and open to 1".
Description
Item#
Each
Mini Bench Vise
820-4052
$7.40
D
Pin Grinding Fixture
This unique precision-machined fixture is used on your surface grinder for accurately hold-
ing and positioning pins and ejector pins for quick and easy cutoff and grinding. The 1
1
/
4
"
wide linear pin grip holds
1
/
16
"
3
/
4
" dia. pins firmly. Pressure is spread out over the entire
width of the grip, eliminating grinding chatter and dents in pins that normally occur when
using a single-point V-block.
Pins 14" and longer are easily and accurately ground to length. Can be used in horizontal
position for end grinding or attached to angle iron for vertical use and face grinding.
Measures only 3
1
/
2
" high with 4
1
/
2
"W x 3"D base.
Description
Item#
Each
Pin Grinding Fixture
819-5000
$369.00
A
Swivel Bench Vise
Dual guide rods ensure parallel closing of jaws, rigidity and steady action. Smooth jaws
help prevent marring of soft metal. Features sturdy cast iron body with anvil top and enam-
el finish. Fits benchtops up to 2" thick. Can be rotated laterally 360° and locked in posi-
tion. Jaws are 2
1
/
2
" wide and open to 2
1
/
2
".
Description
Item#
Each
Swivel Bench Vise
820-4054
$46.20
C
C
A
D
244
Hand Tools
B