Uses a hydrogen/oxygen mixture to produce noncontaminating flames with temperatures
up to 4,850°F (2,675°C). Ideal for soldering and welding.
Includes torch with 4' flexible hose, eight hypodermic-type tips that create pinpoint to
broad flames, chemicals, sight gauges for flux and water, in-line dryer and instructions for
easy setup and operation. Measures 16"W x 9"D x 10"H. Ship. wt: 45 lbs. Made in USA.
Description
to a whole new level. Each creates 0.33.0mm diameter welding points with very low heat,
allowing you to hold workpieces by hand for more control. Discharges a quick burst of
argon gas around the electrode tip and work surface while welding to prevent oxidation,
yielding smooth-as-silk welds with maximum homogeneity. Ideal for permanent welding
and tack welding prior to soldering. Welding is simple: just touch the electrode tip to the
work surface, take a couple seconds to position it where you want, and the weld is made.
If repositioning is needed, simply lift the tip off the work surface to break contact.
These units boast modeled energy impulses with intelligent distribution for welding softly
and prolonging electrode life. When fusing metals in tight areas, a special setting shortens
impulse times to increase weld quality and strength. Micro mode helps with delicate tasks,
enabling microwelding on sheet metal as thin as 0.10mm. Increased controller performance
and gas preflow period that self-adjusts to working speed allow you to work twice as fast.
PUK 3 Professional Plus offers all the benefits of PUK 3 Professional as well as more power,
finer setting ranges and five program slots in which you can save frequently used settings.
Both units include 10"W x 11"D x 6"H stainless steel controller, Mezzo Stereomicroscope
(features precise, adjustable 10X optics with large viewing area for razor-sharp close-ups of
work in progress, electronic eye filter for vision-field darkening, adjustable handpiece arm
and integral 20W lighting unit), 5" long welding handpiece, 10 reversible electrode tips,
cross-locking electrode tweezers, flat electrode pliers, electrode clamp, diamond disc for
cleaning electrode tips, 10' gas hose and complete instructions. Electrical: 110V, 50/60Hz.
Made in Germany according to stringent VDE guidelines. CE approved.
· Weld stainless steel, titanium, bronze, copper and tin alloys.
· Fill porosity in castings by adding the same type of metal.
· Weld different metals together without solder.
· Fix parts with tack welds prior to soldering.