65
Abrasives
A
Norton
®
Bear-Tex
®
Hand Pads
Made of loose nonwoven fiber with abrasive grain mixed throughout. Can be easily cut to
desired size. For cleaning, scuffing, deburring or finishing surfaces by hand. Available in
five grades. Measure approximately 6"L x 9"W x
3
/
8
"H.
BOX of 20
Color
Grit
Abrasive
Application
Item#
1-2
3+
Tan
Medium
AlO
Heavy-duty cleaning
108-7450
$56.20 $50.58
Green
Very Fine
AlO
Scouring and cleaning
108-7451
21.75
18.49
Maroon Very Fine
AlO
General-purpose, deburring
108-7447
22.35
19.00
Gray
Ultra-Fine
SiC
Light cleaning and finishing
108-7448
22.35
19.00
A
3M
TM
Scotch-Brite
TM
Hand Pads
On surfaces that require cleaning, scuffing, deburring or finishing by hand, Scotch-Brite hand
pads outperform steel wool, wire brushes and other nonwoven hand pads. They cut faster
and leave a more consistent finish. And Scotch-Brite pads will never rust, so they can be used
with water or solvents. Available in four color-coded grades for a variety of cleaning and
finishing jobs. Measure 6" x 9". Can be cut to fit Pad Holder or Mini Mandrel (see below).
BOX of 10
Color
Application
Item#
1-2
3+
Tan
Heavy-duty cleaning
108-7461
$26.50
$23.85
Gray
Blending and cleaning
108-7459
17.85
16.07
BOX of 20
Color
Application
Item#
1-2
3+
Maroon
Cleaning and finishing
108-7457
$19.70
$17.73
Light Gray
Fine cleaning and finishing
108-7453
19.70
17.73
B
3M
TM
Scotch-Brite
TM
Pad Holder
For use with Scotch-Brite hand pads (see above) cut to 4" x 6" size.
Description
Item#
Each
Pad Holder, 4" x 6"
108-7462
$17.30
C
3M
TM
Scotch-Brite
TM
Mini Mandrel
1
/
4
" Shank
For use with 1" x 1
1
/
2
" pieces of Scotch-Brite hand pads (see above). Use on contours or
to reach tight areas. Acts like a flap wheel. Measures 2
7
/
8
" long. Has
1
/
4
" shank.
Description
Max. RPM
Item#
Each
Mini Mandrel
14,000
108-7463
$17.95
D
B
D
C
E
Propel-Loc
TM
Finishing System
Change abrasive bands in just seconds without tools!
With the Propel-Loc Finishing System, you slip abrasive bands on and off one drum roller
instead of swapping drum arbors every time you need a different grit. Promotes efficient
finishing of hard and soft metals. Consists of a lightweight, tough polyamide drum roller
with teeth and aluminum oxide abrasive bands with cushioned lining. To mount a band on
the roller, twist in drive direction (direction teeth point) while pushing down until seated;
to remove, twist in drive direction while pulling up. Hollowed-out design of roller permits
free airflow during operation, which keeps bands cool to maximize life.
Try our four-piece starter kit, which includes a
1
/
2
" x
1
/
2
" drum roller with
1
/
8
" shank and
three abrasive bands (60, 80 and 120 grit). Works with any rotary handpiece that accepts
1
/
8
" shank tools. Nine-piece abrasive band assortment (three of each in 60, 80 and 120 grit)
also available. Note: Only Propel-Loc abrasive bands work with drum roller; standard bands
won't work.
Description
Item#
Each
E. 4-Piece Starter Kit
101-0985
$4.99
9-Piece Abrasive Band Assortment
101-0986
4.75
E
All prices subject to change without notice.