function unit is for you. Supplied with the lightweight, vibration-free UF-9700 ultrasonic
handpiece. ULTRAMAX SF has the same ultrasonic polishing capabilities as ULTRAMAX DF.
Includes controller, UF-9700 handpiece with 6mm screw thread, 6/4mm tool adapter
attached (to hold M4 ultrasonic tools on pp. 8283), handpiece cradle rest and tool box
with a 31-piece tool set of four diamond files, three diamond stones, two resin-bonded dia-
mond stones, six ceramic stones, two lapping tools, four flat clamp tool holders, round
clamp tool holder, standard handpiece protector sleeve, large beveled handpiece protector
sleeve, wrenches, set of earplugs and extra fuse.
Vibration frequency: 2030kHz. Stroke length: 440 microns. Max. output power: 45W.
Electrical: 115V or 230V, 1 Ph, 50/60Hz. Controller measures 7"W x 8
ing. Supplied with the lightweight, vibration-free UF-9700 ultrasonic handpiece and can use
our full line of Power Hand 2X mechanical handpieces (see pp. 9098). The ULTRAMAX
DF mechanical handpiece function incorporates speed control, forward/reverse touch pads
and motor stop for complete armature protection.
Includes controller, UF-9700 handpiece with 6mm screw thread, 6/4mm tool adapter
attached (to hold M4 ultrasonic tools on pp. 8283), handpiece cradle rest and tool box
with a 31-piece tool set of four diamond files, three diamond stones, two resin-bonded dia-
mond stones, six ceramic stones, two lapping tools, four flat clamp tool holders, round
clamp tool holder, standard handpiece protector sleeve, large beveled handpiece protector
sleeve, wrenches, set of earplugs and extra fuse.
Vibration frequency: 2030kHz. Stroke length: 440 microns. Max. output power: 45W.
Electrical: 115V or 230V, 1 Ph, 50/60Hz. Controller measures 6
brought the benefits of ultrasonic polishing
to mold and diemakers. ULTRAMAX units
polish slots, ribs and intricate details faster
than you could ever do by hand. Feature
fast reciprocation and short stroke for mak-
ing quick work of the most demanding
tasks. Provide total control for polishing
right up to a wall or edge with confidence.
Broad operating frequency range allows a
wider selection of tools to be used.
maximum tool efficiency. Regulated power
feedback increases handpiece transducer
life and keeps handpiece and tools cool.
With their high output power, DF and SF
units are unaffected by metal hardness.
Handle even the toughest metals with
ease, including tungsten carbide and titani-
um. Polish everything from milled to rough
EDM surfaces to a mirror finish using all
grades of finishing stones, diamond tools,
mond compound (see pp. 144145).
If you intend to work with diamond tools
or ceramic stones only, then consider the
affordable UM-1200. This slightly less
powerful unit polishes everything from
milled to rough EDM surfaces to a mirror
finish using progressively finer abrasives.
operating procedures. Using hand protection (i.e., insulated gloves) and taking frequent breaks can help minimize but not guarantee
against injury. Operating these types of tools in cold weather or with a tight grip will reduce the period of operation before risking
potential injury. Individuals with a tendency to suffer from poor circulation, frequently cold fingers or itchy hands should closely mon-
itor the condition of their hands. If symptoms appear, seek medical advice immediately.