Z-2X and Z-6X Reciprocating Profilers
Both Z-2X and Z-6X provide standard back-and-forth reciprocating
action with choice of speeds and stroke lengths (see chart). They
hold 1.5 to 6.35mm (
1
/
4
") diameter tools as well as 4mm or 6mm
threaded Ultramax ultrasonic tools (see pp. 82-83) with appropriate
adapters (see below) and clamp tool holders (see p. 84). Secured
tools can float freely and be fixed at any position through 360°.
Comfortable grips allow prolonged use.
Description
Item#
Each
A. Z-2X
510-2150
$795.00
Z-6X
510-2160
795.00
A
SZX Side-to-Side Profiler
Provides unique side-to-side reciprocating action with adjustable
stroke. Perfect for polishing base areas in deep cavities, corners and
deep slots. Helps eliminate rounding of sharp corners. Prevents bot-
toming out in blind holes. Holds 1.5 to 5mm (
3
/
16
") diameter tools.
Comfortable grip allows prolonged use.
Description
Item#
Each
SZX
510-2245
$749.00
B
Flats
Deep
Slots
Corners
Cavities
Flats
Corners
Slots
Deep
Cavities
Z-2X and Z-6X Recipro Applications
(back and forth)
SZX Profiler Applications (side to side)
,
Reciprocating Profilers
Choose from three lightweight reciprocating handpieces with powerful 30V DC air-cooled motors and sealed bearings. Use for polishing
flat surfaces, deburring, filing, stoning, scraping, lapping and draw-stoning deep cavities. They operate with minimal vibration to reduce
fatigue and have flexible power cords for easy reach. Special V-shaped chucking system firmly secures a wide variety of abrasives and
other tools (see p. 212 for steel files). Reciprocating stroke lengths are adjustable.
Specifications:
Z-2X
Z-6X
SZX
Strokes per second
Dual or Single Controller*
0-117
0-70
0-133
Standard Controller
29-117
15-70
32-133
Length of stroke
0-2.0mm
0-6.0mm
0-1.6mm**
Maximum Stoppage Torque
Dual Controller, ft.-lbs./N-m
0.056/0.076
0.056/0.076
0.054/0.073
Standard Controller, ft.-lbs./N-m
0.048/0.065
0.048/0.065
0.047/0.064
Single Controller, ft.-lbs./N-m
0.053/0.072
0.053/0.072
0.053/0.072
Maximum shaft output (W/sec.)
Dual Controller
50
50
36
Standard Controller
32.5
32.5
Single Controller
33.8
33.8
33
Weight without power cord
24 oz.
24 oz.
10 oz.
*Or Standard Controller with variable-speed foot rheostat
**Increases with tool length
®
B
A
A
5
1
/
4
"
5"
B
6
1
/
2
"
5
/
8
"
Power Tools
90
Safety Recommendations
For Z-2X, Z-6X and SZX Profilers.
Prolonged use of vibrating or reciprocating tools may result in vibration-induced circulation problems in the hands. Always follow safe
operating procedures. Using hand protection (i.e., insulated gloves) and taking frequent breaks can help minimize but not guarantee
against injury. Operating these types of tools in cold weather or with a tight grip will reduce the period of operation before risking
potential injury. Individuals with a tendency to suffer from poor circulation, frequently cold fingers or itchy hands should closely mon-
itor the condition of their hands. If symptoms appear, seek medical advice immediately.