_files/image001.gif)
|
| 10-03 | V-BLOCK | $110.00 |
| 10-06 | INDEX PIN ASSEMBLY | $ 38.00 |
| 10-08 | DIAL (graduated) | $ 44.00 |
| 10-09 | U-CLAMP WITH SCREW | $ 27.00 |
| 10-10 | T-NUT ASSEMBLY | $ 22.00 |
| 10-11 | ADJUSTABLE STOP (large precision) | $ 36.00 |
| 10-15 | STOP PIN | $ 14.00 |
| 10-30 | CRANK LEVER & REVOLVING KNOB | $ 46.00 |
| 10-33 | V-BLOCK ADJUSTING SCREW | $ 14.00 |
| 10-35 | ADJUSTABLE STOP (small regular) | $ 28.00 |
| 10-48 | INSTRUCTION MANUAL | $ 3.00 |
| 10-50 | CARRYING CASE | $ 75.00 |
| 120-30 | MOTOR (#10758/#30386/#23A0582014G1) | $360.00 |
| 10-77 | DRIVE BELT (for Moto-Grind) | $ 7.50 |
| 41002 | SET OF BEARING BALLS | $ 19.00 |
| 44001 | FELT SEAL (housing) | $ 3.00 |
| 20-03 | V-BLOCK | $194.00 |
| 20-06 | INDEX PIN ASSEMBLY | $ 42.00 |
| 20-08 | U-CLAMP SCREW | $ 15.00 |
| 20-09 | U-CLAMP WITH SCREW | $ 55.00 |
| 20-10 | ADJUSTABLE STOP | $ 49.00 |
| 20-15 | STOP PIN | $ 20.00 |
| 20-18 | CRANK LEVER & REVOLVING KNOB | $ 66.00 |
| 20-33 | FELT SEAL (housing) | $ 3.00 |
| 20-52 | PINION FOR ROTARY | $ 69.00 |
| 20-56 | HANDLE (for rotary table mechanism) | $ 32.00 |
| 20-71 | MOTOR (#147255/#32878) | $400.00 |
| 120-38 | DRIVE BELT (for No.2 Motor Attachment) | $ 7.50 |
| 41002 | SET OF BEARING BALLS | $ 19.00 |
| 49004 | REVOLVING KNOB (large) | $ 26.00 |
| 10-03 | V-BLOCK | $110.00 |
| 10-06 | INDEX PIN ASSEMBLY | $ 38.00 |
| 10-09 | U-CLAMP WITH SCREW | $ 27.00 |
| 10-10 | T-NUT ASSEMBLY | $ 22.00 |
| 10-11 | ADJUSTABLE STOP (large precision) | $ 36.00 |
| 10-15 | STOP PIN | $ 14.00 |
| 10-30 | CRANK LEVER & REVOLVING KNOB | $ 46.00 |
| 10-33 | V-BLOCK ADJUSTING SCREW | $ 14.00 |
| 10-48 | INSTRUCTION MANUAL | $ 3.00 |
| 10-50 | CARRYING CASE | $ 75.00 |
| 41002 | SET OF BEARING BALLS | $ 19.00 |
| 44001 | FELT SEAL (housing) | $ 3.00 |
| 10-06 | INDEX PIN ASSEMBLY | $ 38.00 |
| 10-09 | U-CLAMP WITH SCREW | $ 27.00 |
| 10-11 | ADJUSTABLE STOP (large precision) | $ 36.00 |
| 10-15 | STOP PIN | $ 14.00 |
| 10-35 | ADJUSTABLE STOP (small regular) | $ 28.00 |
| 10-48 | INSTRUCTION MANUAL | $ 3.00 |
| 10-50 | CARRYING CASE | $ 75.00 |
| 120-30 | MOTOR (#10758/#30386/#23A0582014G1) | $360.00 |
| 210-06 | DRIVE BELT (for Ultra-Grind Motor Attachment) | $ 7.50 |
| 215-03 | COLLET DRAW NUT | $ 28.00 |
| 215-05 | V-BLOCK | $185.00 |
| 41001 | SET OF BEARING BALLS | $ 19.00 |
| 44001 | FELT SEAL | $ 3.00 |
| 49004 | REVOLVING KNOB (large) | $ 26.00 |
| 70-06 | CRANK LEVER WITH REVOLVING KNOB | $ 52.00 |
| 10-06 | INDEX PIN ASSEMBLY | $ 38.00 |
| 10-15 | STOP PIN | $ 14.00 |
| 10-48 | INSTRUCTION MANUAL | $ 3.00 |
| 10-50 | CARRYING CASE | $ 75.00 |
| 10-77 | DRIVE BELT (for Moto-Grind) | $ 7.50 |
| 30-25 | ADJUSTABLE STOP | $ 36.00 |
| 120-05 | DRAW NUT | $ 28.00 |
| 120-30 | MOTOR (#10758/#30386/#23A0582014G1) | $360.00 |
| 41002 | SET OF BEARING BALLS | $ 19.00 |
| 44001 | FELT SEAL (housing) | $ 3.00 |
| 49004 | REVOLVING KNOB (large) | $ 26.00 |
| 70-06 | CRANK LEVER WITH REVOLVING KNOB | $ 52.00 |
| 120-02 | SPINDLE BEARING | $ 25.00 |
| 120-05 | DRAW NUT | $ 28.00 |
| 120-06 | MAIN SPINDLE ASSEMBLY | $172.00 |
| 120-07 | SEAL (spindle) | $ 6.00 |
| 120-09 | ROTARY HANDLE (manual) | $ 20.00 |
| 120-20 | INDEX PIN ASSEMBLY | $ 55.00 |
| 120-30 | MOTOR (#10758/#30386/#23A0582014G1) | $360.00 |
| 120-38 | DRIVE BELT | $ 7.50 |
| 120-39 | MOTOR MOUNTING BRACKET | $ 44.00 |
| 30-09 | PINION SHAFT | $ 95.00 |
| 30-10 | KNOB-MAIN SHAFT (aluminum) | $ 25.00 |
| 30-11 | KNOB-ACUTATING (plastic) | $ 17.00 |
| 30-14 | INDEX PIN ASSEMBLY | $ 38.00 |
| 30-16 | DRESSER ARM | $148.00 |
| 30-22 | STOP PIN | $ 13.00 |
| 30-24 | LOCK ASSEMBLY | $ 29.00 |
| 30-25 | ADJUSTABLE STOP | $ 36.00 |
| 30-50 | CARRYING CASE | $ 95.00 |
| 91002 | O.D DIAMOND (#7) | $ 60.00 |
| 91003 | I.D. DIAMOND (.020) | $ 62.00 |
| 91004 | DIAMOND (general) | $ 32.00 |
| 15-02 | TAIL STOCK ASSEMBLY | $440.00 |
| 15-03 | TAIL STOCK CENTER | $ 60.00 |
| 15-05 | TAIL STOCK LOCKING ASSEMBLY | $ 55.00 |
| 25-01 | MOTOR | $ 75.00 |
| 25-02 | MOTORIZED HEAD STOCK | $625.00 |
| 25-03 | HEAD STOCK CENTER | $ 80.00 |
| 25-07 | 2 SPEED PULLEY (on motor) | $ 35.00 |
| 25-08 | MAIN PULLEY (on headstock) | $110.00 |
| 25-09 | MAIN PULLEY BEARING | $ 21.00 |
| 25-17 | DRIVE BELT | $ 7.50 |
| 25-30 | CARRYING CASE | $105.00 |
| 25-40 | CARBIDE HEAD STOCK CENTER | $220.00 |
| 25-41 | CARBIDE TAIL STOCK CENTER | $170.00 |
| 91005 | DIAMOND | $ 27.00 |
| 170-30 | ROTO-SPINDLE MOTOR | $375.00 |
| 120-38 | DRIVE BELT (for Roto-Spindle) | $ 7.50 |
| 155-10 | SET OF FLUSH-CHUCK SEALS (package of 6) | $ 9.00 |
| 170-02 | COLLET NUT (for E-5 Roto-Spindle) | $ 45.00 |
| 170-09 | SPINDLE SEAL | $ 15.00 |
| 170-10 | BRUSHES (each) | $ 5.00 |
| 170-15 | OPEN END WRENCH (for Roto-Spindle) | $ 24.00 |
| 170-16 | CARRYING CASE (for Roto-Spindle) | $ 95.00 |
| 170-20 | SET OF SEALS FOR E-5ROTO-SPINDLE (package of 8) | $ 12.00 |
| 170-25 | EXTRA WASHERS TO HOLD RUBBER SEALS (package of 8) | $ 10.00 |
| 40-03 | TWIN-ANGLE CLAMPS (set of 2) | $ 46.00 |
| 50-09 | EDGE-MASTER CLAMPS (set of 2) | $ 47.00 |
| 120-34 | SPEED CONTROL | $ 48.00 |
| 120-35 | SWITCH (on/off/reverse) | $ 11.00 |
| 120-36 | FUSE HOLDER (tube or micro) | $ 10.00 |
| 120-37 | FUSE (tube or micro) | $ 6.00 |
| 120-40 | CORD (8' long with plug) | $ 26.00 |
| 120-41 | ARMATURE WITH BEARING | $132.00 |
| 120-42 | BEARING FOR ARMATURE (both ends the same) | $ 20.00 |
| 120-43 | BEARING FOR ARMATURE (large front) | $ 14.00 |
| 120-44 | BEARING FOR ARMATURE(small rear) | $ 12.00 |
| 120-45 | BRUSH HOLDER | $ 8.00 |
| 120-46 | BRUSH | $ 5.00 |
| 120-47 | BRUSH HOLDER CAP | $ 5.00 |
| 120-48 | KNOB FOR SPEED CONTROL | $ 8.00 |
_files/image002.gif)